Extrusion Milling Profile Machining with DATRON High Speed CNC Milling Machine. Milling, Drilling, Engraving Aluminum Extrusions on one Machining Center.

Milling Aluminum Extrusions? Many features on DATRON high speed CNC milling machines make them the best choice for machining extrusions and profiles. Start with the fact that aluminum extrusions are milled best with high speed spindles. Then there's our ample machining area (up to 1,020 mm x 2,500 mm) for long extrusions. We also have an optional cut-away table for vertical clamping of aluminum extrusions. Our ethanol mist coolant provides superior finishes and evaporates leaving clean aluminum extrusions with no degreasing required. With 3D probing milling extrusions that are curved or have rounded surfaces is no problem. And the list goes on.

Milling Extrusions to make front panels

Extruded front panel milled with DATRON CNC Machining Center

Superior Extrusion Machining.

No material is more suited to high speed machining than aluminum. Our CNC machines are built from the ground up specifically for milling parts like aluminum extrusions. Automatic tool change allows for milling, drilling engraving and thread milling of extrusions with short cyle times. Options like pneumatic clamping and vacuum chucks or vacuum tables make set up of extrusions and profiles fast and easy. Navigate complex aluminum extrusions automatically with 3D probing which facilitates milling of extrusions with rounded or curved surfaces.

Extrusion Milling Applications:
• Machining Aluminum Extrusions
• Milling Long Profiles
• Milling Front Panels from Extrusions
• Thread Milling Extrusion
• Drilling Extrusion Access Holes
• Milling Aluminum TSLOT Extrusions
• Milling Extrusion Framing
• Milling Aluminum Profiles
• Machining Long Extrusions

Video of Extrusion Milling will load soon (approx. 60 sec.).

TSLOT Extrusion Milled with DATRON High Speed Milling Machine

Front Panels and Control Panels machined from aluminum extrusions and aluminum profiles.

Ethenol Cooolant provides superior milling and engraving of profiles and extrusions and eliminates the need for degreasing because the coolant evaporates after machining.

Mill extrusions with acces holes and slots with DATRON High Speed CNC Machine

DATRON Extrusion Milling Advantages:
• Fast Extrusion Milling Cycles
• 40,000 - 60,000 RPM spindles
• Crisp engraving , milling & drilling
• Auto tool change & tool-length sensing
• Unattended/automated milling
• 3D Probing for machining extrusions with curved surfaces
• Easy extrusion milling programming
• Extrusion threadmilling capability
• Canned cycles for D-holes and other shapes often milled in extrusions
• Coolant leaves clean extrusions

Milling Extrusions with curved surfaces is easy due to our 3D probing capability

CNC Milling Extrusions for Aluminum part production

3D Probing & Surface Mapping for Milling & Engraving Extrusions with Rounded or Curved Surfaces:

Datron’s optional, but integrated Z-Correction Probe recognizes irregular work-piece topography and compensates for it dynamically. It does this by taking measurements along the surface of a part and feeding that data into the machining controller. The controller automatically adjusts for uneven surfaces or part position. Through this process, job setup times are reduced and extrusion engraving and milling is consistent. With the addition of the 3D Extension, the Z-Correction Probe locates extrusions and surface irregularities in the X, Y, and Z co-ordinates, finds centers of holes and bosses, pre-measures extrusions before they are machined, compensates for material variations, feeds data into ISO 9000 information chain for quality control, and even allows for the reverse engineering of many parts. The omni-axis Renishaw TP20 probe is ideal for complex part marking such as engraving a logo or serial number onto a rounded extrusion. Ordinarily, 3D programming would be necessary to accommodate surface depth changes and ensure an even depth engraving. With the TP20, the surface is scanned and irregularities or surface changes are automatically managed in the machining data without 3-D programming. The TP20 features a 6-way, kinematic, touch-trigger probe system to significantly improve part marking cycle times.

Extrusion Routing at high speed with a 60,000 RPM Spindle

Engrave Extrusions with curved and rounded surfaces while maintaining an even depth of engraving due to DATRON 3D Probing.

Milling Extrusion fins in hollow aluminum extrusion

Large Bed for Long Extrusions: With workable machining areas up to 40" x 100" long extrusions fit easily for machining. Plus, our Vacuum Table technology allows for flat extrusions to be set up quickly.

Milling and Drilling Extrusions on on CNC Milling Machine

Threadmill Aluminum Extrusion

Microdrilling, tapping, threadmilling aluminum extrusions.

Long aluminum profiles and extrusions can be machined on the large work area of the DATRON CNC.

Throu holes in multi-surface aluminum extrusion

Extrusion Milling Questions?

Call DATRON at 888.262.2833


	Datron Dynamics, Inc. 115 Emerson Road Milford, NH 03055			German Engineered. American Supported. High-Speed CNC Milling and Engraving Machines for Precision Machining.
	phone: 603.672.8890 info@datrondynamics.com			In our constant effort to improve our products and services, we reserve the right to change specifications with or without notice.
	(c) Datron Dynamics, Inc. 2005			Terms And Conditions Of Sale apply.

The DATRON M8 High-Speed Machining Center is ideal for milling extrusions and aluminum proffiles.. It features a 60,000 RPM Spindle and an Ethanol-mist coolant that evaporates after machining leaving a clean aluminum extrusions.